آموزش Design module-Pipework application-PDMS

توضیحات

Design module-Pipework application English Course contents:

1.       First look to what we want to do... (12 min)

·         Running PDMS

·         Using the pipework menu bar

·         Using the design explorer

·         Entering some simple and applicable commands

·         Take a look to site stabilizer

2.       A short lesion: Specification in PDMS (4min)

·         Using the "help" to find meaning of "A3B"

·         Using the pipework toolbar

3.       An important matter... heads and tails! (8min)

·         Check connection of branch head and tail with related commands

·         Using the "Pipe modification form"

·         Setting the head and tail connection for a sample branch

4.       Checking a real project is inescapable! (4min)

·         Checking the compatibility of specification between nozzles and branch

·         Checking the bore between nozzles and branch

5.       Don't forget to check the ratings and bores of nozzles... (4 min)

·         Checking  a real project to find its differences with PDMS sample project 

6.       Let's work (10 min)

·         Setting graphics

·         Creating a pipe

·         Setting specification

·         Using exercise manual

·         Creating a branch

·         Checking head and tail attributes

7.       Creating of components from the pipework toolbar (5 min)

·         Creating components for our branch

·         Introduction to model editor

8.       Creating components via Create menu (7 min)

·         Using "Delete range of piping components" icon

·         Creating components with another form

9.       A simple use of Model editor (7min)

·         A simple way to aligning a component with any other element

·         Rotating components

·         Measuring distances

·         Modifying arrive and leave of components

10.   A general look to Model editor (9 min)

·         Extending pipes with model editor

·         Quick pipe routing

·         Creating components in backward

11.   Alignment of components with use of model editor (8min)

·         Using the positioning control

12.   Creating components at branch tail (8min)

·         Quick pipe routing

·         Creating components in backward before completing branch

13.   Place the component (6min)

·         Creating components using "place" icon in "create components" menu

14.   The second branch (5 min)

·         Display axis on components

·         Creating a new branch

15.   Copying the branch (4min)

·         Use of "Copy offset"

·         Deleting extra components

16.   The last session (3 min)

·         Rotating valves with model editor

·         Using "Align selection/components" and "Direct selection/components" iconsDesign module-Pipework application English Course contents:

1.       First look to what we want to do... (12 min)

·         Running PDMS

·         Using the pipework menu bar

·         Using the design explorer

·         Entering some simple and applicable commands

·         Take a look to site stabilizer

2.       A short lesion: Specification in PDMS (4min)

·         Using the "help" to find meaning of "A3B"

·         Using the pipework toolbar

3.       An important matter... heads and tails! (8min)

·         Check connection of branch head and tail with related commands

·         Using the "Pipe modification form"

·         Setting the head and tail connection for a sample branch

4.       Checking a real project is inescapable! (4min)

·         Checking the compatibility of specification between nozzles and branch

·         Checking the bore between nozzles and branch

5.       Don't forget to check the ratings and bores of nozzles... (4 min)

·         Checking  a real project to find its differences with PDMS sample project 

6.       Let's work (10 min)

·         Setting graphics

·         Creating a pipe

·         Setting specification

·         Using exercise manual

·         Creating a branch

·         Checking head and tail attributes

7.       Creating of components from the pipework toolbar (5 min)

·         Creating components for our branch

·         Introduction to model editor

8.       Creating components via Create menu (7 min)

·         Using "Delete range of piping components" icon

·         Creating components with another form

9.       A simple use of Model editor (7min)

·         A simple way to aligning a component with any other element

·         Rotating components

·         Measuring distances

·         Modifying arrive and leave of components

10.   A general look to Model editor (9 min)

·         Extending pipes with model editor

·         Quick pipe routing

·         Creating components in backward

11.   Alignment of components with use of model editor (8min)

·         Using the positioning control

12.   Creating components at branch tail (8min)

·         Quick pipe routing

·         Creating components in backward before completing branch

13.   Place the component (6min)

·         Creating components using "place" icon in "create components" menu

14.   The second branch (5 min)

·         Display axis on components

·         Creating a new branch

15.   Copying the branch (4min)

·         Use of "Copy offset"

·         Deleting extra components

16.   The last session (3 min)

·         Rotating valves with model editor

·         Using "Align selection/components" and "Direct selection/components" iconsDesign module-Pipework application English Course contents:

1.       First look to what we want to do... (12 min)

·         Running PDMS

·         Using the pipework menu bar

·         Using the design explorer

·         Entering some simple and applicable commands

·         Take a look to site stabilizer

2.       A short lesion: Specification in PDMS (4min)

·         Using the "help" to find meaning of "A3B"

·         Using the pipework toolbar

3.       An important matter... heads and tails! (8min)

·         Check connection of branch head and tail with related commands

·         Using the "Pipe modification form"

·         Setting the head and tail connection for a sample branch

4.       Checking a real project is inescapable! (4min)

·         Checking the compatibility of specification between nozzles and branch

·         Checking the bore between nozzles and branch

5.       Don't forget to check the ratings and bores of nozzles... (4 min)

·         Checking  a real project to find its differences with PDMS sample project 

6.       Let's work (10 min)

·         Setting graphics

·         Creating a pipe

·         Setting specification

·         Using exercise manual

·         Creating a branch

·         Checking head and tail attributes

7.       Creating of components from the pipework toolbar (5 min)

·         Creating components for our branch

·         Introduction to model editor

8.       Creating components via Create menu (7 min)

·         Using "Delete range of piping components" icon

·         Creating components with another form

9.       A simple use of Model editor (7min)

·         A simple way to aligning a component with any other element

·         Rotating components

·         Measuring distances

·         Modifying arrive and leave of components

10.   A general look to Model editor (9 min)

·         Extending pipes with model editor

·         Quick pipe routing

·         Creating components in backward

11.   Alignment of components with use of model editor (8min)

·         Using the positioning control

12.   Creating components at branch tail (8min)

·         Quick pipe routing

·         Creating components in backward before completing branch

13.   Place the component (6min)

·         Creating components using "place" icon in "create components" menu

14.   The second branch (5 min)

·         Display axis on components

·         Creating a new branch

15.   Copying the branch (4min)

·         Use of "Copy offset"

·         Deleting extra components

16.   The last session (3 min)

·         Rotating valves with model editor

·         Using "Align selection/components" and "Direct selection/components" icons

سرفصل

  • 16 بخش
  • 02:44:0

مدرسین

این دوره به صورت آرشیو شده به شما ارائه خواهد شد، اما در صورتی که در حین مشاهده دوره ها سوالی داشتید، می توانید سوال خود را زیر همان بخش در قسمت سوالات، مطرح کنید. مدرس مربوطه در کوتاه ترین زمان ممکن به سوالات شما پاسخ خواهد داد.